How To Install A Medicine Cabinet

Installing a medicine cabinet is a relatively simple task that can be completed in a few hours. With the right tools and materials, you can easily add this convenient storage space to your bathroom. Here are the steps on how to install a medicine cabinet:

Gather Your Materials

Before you begin, gather all of the materials you will need for the installation. These include:

Medicine cabinet
Screwdriver
Drill
Level
Pencil
Measuring tape
Anchors (if needed)
Caulk

Choose A Location

Once you have gathered your materials, you need to choose a location for the medicine cabinet. The cabinet should be installed above the sink, at a height that is comfortable for you to reach. You should also make sure that there is enough clearance around the cabinet so that you can open the doors easily.

Mark The Holes

Once you have chosen a location, mark the holes for the screws. To do this, hold the medicine cabinet against the wall and use a pencil to mark the location of the holes. Then, use a level to make sure that the cabinet is level.

Drill The Holes

Once you have marked the holes, use a drill to drill pilot holes for the screws. The pilot holes should be slightly smaller than the screws.

Install The Anchors (If Needed)

If you are installing the medicine cabinet into drywall, you will need to install anchors into the wall before you can insert the screws. To do this, insert the anchors into the pilot holes and then use a screwdriver to tighten them.

Install The Screws

Once the anchors are installed, you can insert the screws into the pilot holes. Tighten the screws until the cabinet is securely attached to the wall.

Caulk The Cabinet

To finish the installation, caulk around the edges of the medicine cabinet. This will help to seal the cabinet and prevent moisture from getting inside.