How To Make Raised Panel Cabinet Doors

Raised panel cabinet doors are a popular choice for kitchens and bathrooms because they add a touch of elegance and style. They are also relatively easy to make, even for beginners. Here is a step-by-step guide on how to make raised panel cabinet doors:

Materials:

1x6 pine boards
1/4-inch plywood
Wood glue
1-1/4-inch brad nails
Clamps
Router with a raised panel bit
Safety glasses
Dust mask

Instructions:

Step 1: Cut the frame

The first step is to cut the frame for the cabinet door. The frame will be made from 1x6 pine boards. The width of the frame will depend on the size of the cabinet door. For a standard cabinet door, the frame will be 24 inches wide. The height of the frame will be the same as the height of the cabinet door. To cut the frame, use a miter saw to cut the 1x6 pine boards at a 45-degree angle. The two long pieces of the frame will be the same length as the width of the cabinet door. The two short pieces of the frame will be the same length as the height of the cabinet door. Once the frame is cut, assemble it using wood glue and brad nails. Make sure that the joints are square and that the frame is sturdy.

Step 2: Cut the panel

The next step is to cut the panel for the cabinet door. The panel will be made from 1/4-inch plywood. The size of the panel will be the same as the size of the opening in the frame. To cut the panel, use a jigsaw or a circular saw. Once the panel is cut, sand the edges smooth.

Step 3: Route the raised panel

The next step is to route the raised panel. This will create the decorative edge on the panel. To route the raised panel, use a router with a raised panel bit. The size of the raised panel bit will depend on the size of the cabinet door. To route the raised panel, follow the instructions that came with the router bit. Once the raised panel is routed, sand the edges smooth.

Step 4: Assemble the cabinet door

The final step is to assemble the cabinet door. To assemble the cabinet door, apply a bead of wood glue to the inside of the frame. Then, place the panel in the frame and press it into place. Use clamps to hold the frame and panel together while the glue dries. Once the glue is dry, the cabinet door is complete.