How To Mount Cabinet Handles

Cabinet handles are an important part of any kitchen or bathroom. They not only provide a way to open and close the cabinets, but they also add a touch of style to the room. There are many different types of cabinet handles available, so you can find one that matches your taste and décor. Once you've chosen the perfect handles, it's time to install them. Here are a few tips on how to do it like a pro:

1. Measure and mark the location of the handles

The first step is to measure and mark the location of the handles. This will ensure that they are evenly spaced and centered on the cabinets. To do this, use a measuring tape to find the center of the cabinet door. Then, mark the location of the handle with a pencil or a piece of masking tape.

2. Drill pilot holes

Once you've marked the location of the handles, it's time to drill pilot holes. This will make it easier to screw in the handles without splitting the wood. To drill pilot holes, use a drill bit that is slightly smaller than the screws that you will be using.

3. Screw in the handles

Now it's time to screw in the handles. To do this, use a screwdriver that is the right size for the screws. Start by screwing in the handles loosely. Then, tighten them until they are snug.

4. Check the alignment of the handles

Once you've screwed in the handles, check the alignment of the handles. Make sure that they are all level and centered on the cabinets. If any of the handles are not aligned correctly, loosen the screws and adjust the handle until it is aligned correctly.

5. Tighten the screws

Once you're satisfied with the alignment of the handles, tighten the screws until they are snug. Do not overtighten the screws, as this could damage the handles or the cabinets.

6. Enjoy your new cabinet handles

Now that you've installed your new cabinet handles, you can enjoy the new look of your kitchen or bathroom. With a little care and attention, your cabinet handles will last for many years to come.