Mounting Glass In Cabinet Doors

Mounting glass in cabinet doors can be a daunting task, but with the right tools and techniques, it can be a breeze. Here's a step-by-step guide on how to do it right:

1. Prepare the Cabinet Doors

Start by removing the cabinet doors from the cabinet. Then, lay them flat on a clean surface and use a measuring tape to locate the center of each door. Mark the center with a pencil.

2. Cut the Glass

Measure the inside of the cabinet door frame and cut a piece of glass to fit. Use a glass cutter or a diamond-tipped drill bit to score the glass, then snap it along the score line.

3. Apply the Adhesive

Apply a thin bead of silicone adhesive around the perimeter of the cabinet door frame. Make sure to apply the adhesive evenly and consistently.

4. Set the Glass

Carefully place the glass into the cabinet door frame. Align the glass with the center marks you made earlier. Press down on the glass firmly to seat it in the adhesive.

5. Wipe Away Excess Adhesive

Use a clean cloth to wipe away any excess adhesive that may have squeezed out. Be careful not to smear the adhesive.

6. Secure the Glass

Once the adhesive has dried, you can secure the glass in place by installing glazing points. Glazing points are small, triangular pieces of metal that hold the glass in the frame.

7. Reinstall the Doors

Once the glazing points are installed, you can reinstall the cabinet doors. Make sure to align the doors properly and tighten the screws.

Tips

Use high-quality glass and adhesive to ensure a durable and long-lasting installation.
Wear gloves and safety glasses when working with glass to avoid injury.
If you're not confident in your ability to mount glass in cabinet doors, consult with a professional.